Maintain and replace the key points of Fusheng Air Compressor Parts.
Under normal operation, should stop the machine set empty Compressor oil cylinder to the lubricating oil, when stop oil change, as far as possible put on oil, it can put the inside of the Air Compressor oil cylinder has thoroughly some, ensure Fusheng Air Compressor Parts and machine run normally, within 3000 hours of high-quality Fusheng Air Compressor Parts
Service life, but the quality of lubricants and the accuracy of air filtration have a great impact on their lives.It can be seen that in the harsh environment, the maintenance and replacement cycle of the air filter must be shortened, and even the pre-loaded air filter can be considered.
2.The content of Fusheng Air Compressor Parts must be replaced after the expiration or 0.12mpa pressure difference.Otherwise, the engine will be overloaded, the oil will be destroyed and the oil will run.
Fusheng Air Compressor Parts replacement method:
A) remove the control pipe joint installed on the oil and gas tank cover, remove the return pipe from the tank cover, and remove the fasteners from the oil drum and air drum.
B) remove the lid from the oil and gas cabinet and remove the oil separator.Remove asbestos MATS and dust on top.
C) load the new oil separator and notice that the asbestos pad must be nailed. When pressed, the asbestos pad must be pressed, otherwise it will cause flushing.
D) return the upper cover, return tubing and each control tube to check for leaks.
At the end of the screw host also USES air compressor oil lubrication bearing, with large dust particles in air compressor oil also accelerated the heavy-duty bearing wear, originally can use 8 to 100000 hours, probably in less than 8 hours, the host, in addition to the maintenance.
Initial pressure difference<0.02MPa
Residual oil amount<3PPM
Contact: Jane Liu
Tel: 86 13806392573
WhatsApp/Wechat: 86 13806392573
Add: Qingdao Hou De Forest International Residential Quarter