Air compressor is a kind of power machine, at the same time of its power, is also the process of consumption itself, for this kind of machine, it is particularly important to the maintenance and repair, reasonable maintenance and repair can increase the service life of air compressor, for enterprises to reduce costs, increase profits and increase economic benefits.
1. The Sullair Oil Filter must be replaced for 300 to 500 hours after the first operation, and the second time is replaced with 2000 hours, and then it will be replaced every 2,000 hours after the normal time.
2, Sullair Oil Filter maintenance and replacement parts must be identified: when the pressure inside the air compressor system has been released, with the rest of the pressure source is separated, the main circuit switch has broken, and no security identity of closing has been completed.
3. When the Sullair Oil Filter repairs and changes the air Filter or the intake valve, it is important to prevent any sundries from falling into the compressor's main chamber.
When the operation is completed, the main entrance is closed. After the operation is completed, it is necessary to turn several circles in the rotation direction of the host by hand, and make sure that there is no obstacle to start up.
4. The replacement time of the compressor's cooling lubricant depends on the use of the environment, humidity, dust and air to have the acid and alkali gas.
The newly purchased air compressor must replace the new oil for 500 hours for the first time, and the machine should be replaced every 4000 hours after the normal oil changing cycle. The machine should be replaced every year for less than 4000 hours.
5. When changing Oil, Sullair Oil Filter should be replaced at the same time.
6. Replace the spare parts of the air compressor as much as possible. Otherwise, the supplier will not be responsible for the matching problem.
7. Check the tightness of the belt when the machine is running around 2000 hours. If the belt is loose, adjust it until the belt tensioning.
In order to protect the belt, it is necessary to prevent the belt from being damaged by oil pollution during the whole process
Residual oil amount<3PPM
Contact: Jane Liu
Tel: 86 13806392573
WhatsApp/Wechat: 86 13806392573
Add: Qingdao Hou De Forest International Residential Quarter